Optic Cover Installation

Step by step installation guide

WARNING: Before installing always make sure your firearm is unloaded and your muzzle is pointed towards a safe direction.

Option 1: (Optic Cover Only)

Step 1: Insert Optic Cover

Step 2: Snap interlock pins into the drain hole

 

Option 2: (Optic Cover + Lens Cover)

Step 1: Locate the slot to insert training lens into the optic cover

Step 2: Ensure training lens is positioned in the groove area

Step 3: While facing down, insert optic device into the optic cover

Step 4: Make sure optic cover is secured and has a snug fit

  

INFO: Even thought these videos are titled for specific models you can use the same steps for all the other red dot scope covers.

Installation for Trijicon RMR HD

Link to youtube: https://youtu.be/yYDiXyprXZI?si=3LS8BcpW9pZlcmyy

 

Installation for Holosun EOtech EFLX

Link to youtube: https://youtu.be/vSeSRMylQCI?si=SU703PvnvezL_gQG

 

Installation for Holosun SCS Carry

Link to youtube: https://youtu.be/h2Xq_OaKjpE?si=grM9KbbG_7k4taas

 

Installation for Burris FastFire3

Link to youtube: https://youtu.be/rY2iGmyDWZ0?si=MkBNh4hwKbxU62yZ

 

Installation for Holosun SCS MOS

Link to youtube: https://youtu.be/2s5BwyzQlS8?si=hpHF-6bh-qaQdxmP

 

Installation for Holosun SCRS

Link to youtube: https://youtu.be/1ZYYjZ2vluY?si=lGBNQFZHPnFPMYnJ

 

Installation for Aimpoint ACRO P-2

Link to youtube: https://youtu.be/AdN4LKdTk74?si=RktxPuwx4XPmvu4S

  

Installation for Holosun 509T

 Link to youtube: https://www.youtube.com/watch?v=wghVoyeRw1c